Search found 29 matches

by Suppanel
Wed Jul 01, 2020 5:15 pm
Forum: Message Board
Topic: Suggestion: adding momentary switch control function.
Replies: 1
Views: 25

Re: Suggestion: adding momentary switch control function.

Hello,
Thanks for your inquiry,

What you are asking for is not implemented, nor will it be in the future, by design the simple touch on the screen is used to scroll the panel and not to change the on/off state or change the value of the controls.

Best regards.
by Suppanel
Fri May 29, 2020 9:04 am
Forum: Message Board
Topic: Error 112.
Replies: 1
Views: 63

Re: Error 112.

Hi, Error 112 usually happens when the connection to the server is slow and has a big delay, you can try increasing the Timeout in the connection properties. If you want a simulated test server that works well for me, I recommend you install "OPC UA ANSI C Demo Server v1.9.0" here: https://www.unifi...
by Suppanel
Fri May 22, 2020 12:07 pm
Forum: Message Board
Topic: DATE AND TIME
Replies: 1
Views: 65

Re: DATE AND TIME

Suppanel cannot read it, nor is it planned to incorporate it in the future.

Thanks.
by Suppanel
Fri May 22, 2020 12:05 pm
Forum: Message Board
Topic: S7-1200
Replies: 3
Views: 128

Re: S7-1200

If you mean a fieldbus remote input then Suppanel can't access it. Try copying the input to an internal bit of the PLC.

Siemens has never published the communication protocol for its PLCs. Suppanel and others HMI use an old communication library that has many limitations.

Thanks for you inquiry.
by Suppanel
Sun May 17, 2020 3:16 pm
Forum: Message Board
Topic: S7-1200
Replies: 3
Views: 128

Re: S7-1200

Hello,
Thanks for your inquiry.
Please verify that you have "Optimized Block Access" disabled in your DB preferences in your PLC project.

Regards.
by Suppanel
Sat May 09, 2020 3:33 pm
Forum: Welcome
Topic: New Members
Replies: 12
Views: 3063

Re: New Members

Welcome Hulkman , thanks for your message.
by Suppanel
Sat May 09, 2020 3:31 pm
Forum: Message Board
Topic: Momentum plc
Replies: 1
Views: 79

Re: Momentum plc

Hello, Thanks for your inquiry. The next thing is that you find the mapping of the internal registers and bits of the PLC to Modbus addresses, in the manuals or the programming software of your PLC. Then you should use those addresses in the properties of the Suppanel panel controls. This is differe...
by Suppanel
Sun Feb 23, 2020 9:20 pm
Forum: Message Board
Topic: Modbus TCP through a gateway
Replies: 1
Views: 746

Re: Modbus TCP through a gateway

Hello

I will probably add the possibility of selecting the ID Unit on the Mobdus connection control in a future update, but this will not happen before 2 or 3 months.

Regards.
by Suppanel
Mon Dec 30, 2019 8:25 am
Forum: Message Board
Topic: Modbus holding address
Replies: 1
Views: 366

Re: Modbus holding address

Hello,
Suppanel uses 6 digits Modbus addressing and your Schneider manual uses 5 digit address.
To convert from 5 to 6 just insert an extra 0 after the 4, then 40001 on the manual will be 400001 for Suppanel.

Hope it will work.

Thanks for your inquiry.
by Suppanel
Tue Dec 17, 2019 5:43 pm
Forum: Message Board
Topic: Error Code List
Replies: 1
Views: 194

Re: Error Code List

Hello,
You can see the full error list on Help >> Error Codes in the menu on the left side of Suppanel app