Suppanel

Hello Wil

The "Select from external gallery" adds the external image directly to the control properties, but it doesn't add the image to the Suppanel images gallery.

Regards.

Hello,
Thanks for your inquiry,

What you are asking for is not implemented, nor will it be in the future, by design the simple touch on the screen is used to scroll the panel and not to change the on/off state or change the value of the controls.

Best regards.

Hi, Error 112 usually happens when the connection to the server is slow and has a big delay, you can try increasing the Timeout in the connection properties. If you want a simulated test server that works well for me, I recommend you install "OPC UA ANSI C Demo Server v1.9.0" here: https:/...

Suppanel cannot read it, nor is it planned to incorporate it in the future.

Thanks.

If you mean a fieldbus remote input then Suppanel can't access it. Try copying the input to an internal bit of the PLC.

Siemens has never published the communication protocol for its PLCs. Suppanel and others HMI use an old communication library that has many limitations.

Thanks for you inquiry.

Hello,
Thanks for your inquiry.
Please verify that you have "Optimized Block Access" disabled in your DB preferences in your PLC project.

Regards.

Welcome Hulkman , thanks for your message.

Hello, Thanks for your inquiry. The next thing is that you find the mapping of the internal registers and bits of the PLC to Modbus addresses, in the manuals or the programming software of your PLC. Then you should use those addresses in the properties of the Suppanel panel controls. This is differe...

Hello

I will probably add the possibility of selecting the ID Unit on the Mobdus connection control in a future update, but this will not happen before 2 or 3 months.

Regards.

Hello,
Suppanel uses 6 digits Modbus addressing and your Schneider manual uses 5 digit address.
To convert from 5 to 6 just insert an extra 0 after the 4, then 40001 on the manual will be 400001 for Suppanel.

Hope it will work.

Thanks for your inquiry.